![]() ![]() If all you are trying to do is to make a HMI for a small/medium sized S7 application, then I would recommend Protool Pro, it is the fastest and cheapest way. And I think that OPC has a better future in general. Besides the 128 kByte user memory, the CPU. PCS 7 was developed based on the products in the SIMATIC family. It is the result of system development and integration from the experience of previous systems such as TELEPERM M, SIMATIC S7, SIMATIC S5. ![]() SIMATIC PCS 7 is a process control system of SIEMENS. CC 03 Commander Compact In the VIPA Commander Compact CC 03 a PLC CPU, programmable with Siemens STEP7, is integrated. PCS-7 is the overall integrated automation solution for process control systems. OPC will learn you something that you can use many more places. Project planning is carried out with VIPA OP-Manager or Siemens ProTool. I would only recommend Prodave if you are exclusively considering S7 in the future. The next releases of Protool will be renamed "Win CC Flexible". Protool and Win CC will melt together in the future. Protool Pro can also act as an OPC server, so it could for example pass a PLC connection on to a WIN CC OPC client.ħ. Protool Pro can be an OPC client in addition to its internal drivers that doesnt use OPC.Ħ. ![]() Protool "Pro" is a (small) PC based SCADA package. OPC is more and more becoming the way to connect PC applications with PLCs (and other devices).ĥ. Now let’s learn how to configure an IP address for device in Siemens TIA PORTAL. The IP address of IPV6 is quite different and in the industrial world, it rarely uses. IP address or internet protocol is used to define addresses to recognize devices in the network.įor example, the device has an IP address of 192.168.0.10 in which the first three-part contain network information and a last part is a device number.Įarlier IPV4 was used which was founded in the 1980s and stay active till 2006 till IPV6 was found.Įarlier before the introduction of the SMART phone device was working on IPV4 but increasing in usage and to connect more devices IPV4 was not sufficient, to support more devices IPV6 was introduced. Profinet devices are recognized by valid IP addresses. To connect Profinet in the larger network we can use network switch for easy distribution. So you can use Profinet with PLC, HMI, remote I/O, sensors, actuator, VFD. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
January 2023
Categories |